Welding Capabilities

(Effortless and seamless best describes our welding talent. We have the best MIG, TIG, SPOT, SAW, STICK and SMAW wielders on our team. What do you need welded?)


1) WHAT IS METAL INERT GAS WELDING? (MIG). This a process that uses a wire spool to feed wire to the joint and has a bottle of gas that flows from the machine to the welding handle to protect the weld from the air around it.

2) WHAT IS TUNGSTEN ARC WELDING? (TIG). This a torch that has a gas flowing through it with a non consumable rod made of tungsten that heats the metal and the filler metal is held in the other hand and manually added when needed.

3) WHAT IS SPOT WELDING? (SPOT). Spot welding is the most commonly used form of resistance welding. Usually it is used to weld various sheet metals with reduced thickness.

4) WHAT IS SUB ARC WELDING? (SAW).  Submerged Arc Welding uses heat generated by an arc formed when an electric current passes between a welding wire and the workpiece. The tip of the welding wire, the arc, and the weld joint are covered by a layer of granular flux.

3) WHAT IS SHIELDED METAL ARC WELDING? ( also called STICK or SMAW welding) This welding uses a rod called an electrode that has a powder coating (technically a flux) on it. It burns or melts to create a shield from oxygen. Some rods have filler metal added to the coating to speed up the welding process.

****Almost any metal can be welded depending on the process and conditions. Please feel free to call us at 816-331-7100 and discuss your project.



10 Welders
(Welding is semi-automatic and includes gas shielded.)
Variety includes MIG, TIG, STICK, SPOT
  Submerged Arc up to 20′ Long
20’x 1/2” gap shearing up to 40′



Do you need a custom prototype? Short run? Large fabrication project? Feel free to contact us at 816-331-7100 or to email us. We look forward to working with you on your next project!